A, main technical parameter 1. Main motor power, 2.2kw 2. Motor power of hydraulic station, 2.2KW 3. Forming stations, 14 main stations 4. Raw material thickness, 0.6mm 5. Forming speed, 12M/min 6. Diameter of roller shaft, 55mm 7. Raw material width, 125mm 8. Hydraulic station pressure, 12MPa 9. Roller surface coating with chrome, single side 0.05mm 10. Material of cutter, Cr12 11. Frequency, Taiwan Hongquan 12. Computer, PLC, Mitsubishi FX-IS 13. Cutting type, hydraulic driving, cutting after forming B, Components This machine is composed of 3T uncolier, main forming machine, cutting after forming, hydraulic station, electrical system, and out-put table. C, Flow chart Feeding (put the coil on the umbrella type uncoiler, put on the support after expansion) ---uncoiling and leveling---guide feeding (by guide table device) ---roll forming---cutting after forming---out put D, Features 1. Main shaft adopted fine 45# steel, heating process. 2. Roller adopted 45# forge steel, processed by CNC finishing and surface coating with chrome, it has good size precision. 3. Main forming machine adopted gear retarder driving, all rollers adopted chain driving, stable and reliable. 4. This machine adopted forming punch cutting, hydraulic driving, and action safe and reliable, can sure the final profile front and end of panel effective width same. 5. Cutter material Cr12,after heating process, the hardness can reach HRC60° 62°