A. The outer employs air cell, there is no need to put an order for the outer mold. Just put an order for the inside mold according to the shoe type. B. Control and design the accurate operating sequence according to the patten, making the finalizing effects better. C. The inflation and deflation of the air cell can be controlled by a serial of air pressure value with P.L.C. vacuum contractor makes the absorbing and the expansion deflated air cell better. Ensure that there is maximum working room, without making the shoes rubbed. The air cell is made with special materials, with protective leather cover, making the effect of the pressing better. D. Able to choose the pressing time after the air cell is inflated. E. The working lights are selectable materials, besides used for lighting, assisting in the accurate possitioning of the vamp. F. Employ imported sets with double coolers, and select the cooling sets. If the working amount is not great, one set can be chosen, reducing the waste, making the effects of the cooling finalizing better. G. The cooling molds do not swing, but is operated directly, improved the efficiency. This machine is fixed with multi-functional clamp, making the vamp and the shoe mold better atteched. ModelSD-688ADimensions1300*840*1850mmPacking size1450*990*2150mmG.W.665kgN.W.540kgOutput2500-3600pairs/8hoursVoltage220vPressure6kg/cm2