JT-UV9206 Грунтовка-бесплатно и без отпечатков пальцев УФ Varni

JT-UV9206 Primer-free and Non-fingerprint UV Varnish A. Product profile It is unnecessary to apply water based primer before JT-UV9206 is used. One pass coating for gravure printing has advantages including good adhesion, high gloss, high abrasion and low odor. Besides, compared with traditional UV coating, primer free varnish saves one step of process, and reduces the risk brought by inappropriate usage for water based primer. This produce is made from UV-curable resin and active diluter, quick form film after cured by UV light. It is widely used for different types of paper to provide high gloss, and not easy to get the obvious mark after touched by fingers. It meets the Toy Security and Health Standard, and has been certificated by SGS for heavy metal contents. B) Specifications Appearance: light yellow and half-transparent liquid. Viscosity: 30-50 seconds ( paint -4 cup, 25 °c) C) Usage Recommendation 1. This product can be applied by roller coater, in-line or of-line. Coating weight depends on quality of paper.. 2. UV light of intensive > 50mj/cm² is suggested for curing. 3. Reduce viscosity by adding a small ratio of ethyl acetate and toluene. 4. Clean up all other UV varnish in the tank and on rubber roller before use JT-UV9206. D) Notice 1. Shelf-life is 6 months, use up during shelf-life. 2. Keep away from direct sunlight, avoid unopened can exposure to strong light for long time. 3. Jitian K695 can be used for machine cleaner. 4. All the data above are acquired in the laboratory. They can only be used as reference in practical application. Because the paper, printing ink and process are different, the data can be different. Customer needs to test before put into use and decide the applicability for himself. E) Package (1) Yellow iron can. (2) Net weight: 20kg/200kg.