инкубатор

J88 semi egg incubator,egg incubator,family incubator 1pc/46x34x80cm/ctn/30kgs An Operating Guidance to the Incubator1.A brief instruction to the incubator Thanks for using the incubator designed by our company. This incubator applies to hatching hen’s eggs and ducks’ eggs.The temperature controller can control the temperature safely and exactly,it can limits the temperature inside the incubator under the value you set,even if the temperature exceeds the limit,the control system can fall back it to the value you set. 2. Some Preparation for Using the Incubator 1.Befor using the incubator,you should be familiar with the knowledge of incubator,setting a suitable temperature is varry important. 2.Place the incubator at a planar place, connect the plug to an installed correctly socket. Ensure that the fans don’t be enlaced by any things. 3. Start up the power supply, let the incubator work about one hour to make the temperature go to a balanced status, then you can put the eggs onto the egg shelves for hatching.3. Detailed instruction to the temperature controller 1-power supply switch:Press “1” to open the instrument. 2-display window of the temperature inside the incubator:it display the temperature measured by the sensor inside the incubator. 3-set the temperature:set suitable temperature according to the equipment of incunbation. Increase the temperature by pressing “+”; Decrease the temperature by pressing “-”; When the temperature inside the incubator (displayed on the window)exceeds this temperature you set to 0.7°C,the buzzer will give an alarm. 4-switch of eliminating the sound of alarm buzzer:The buzzer will give an alarm if the temperature exceed the temperature you set,you maybe fell it to harsh,you can move the key to “Close” to turn off the sound. 5-indicator light of heating status:It shine when the temperature inside the incubator under the value you set,at the same the heating bulb working. 6-indicator light of contant temperature:It shines when the heating bulb stop working,the temperature will not increase any longer. 7-indicator light of over heat or temperature sensor fault: It shine when the temperature inside the incubator exceed the value you set to 0.7°C,at the same time the lighting bulb stop working,and the temperature will fall back to the value that bellow the value you set.On the other hand,this indicator light shines if the temperature sensor have a trouble.