Инъекционная смола затирки машина

Portable body, weighing only 7kg, easy to carry & maintain, maximum output pressure up to 13500psi. The fault can be self-maintenance during site operation. The medicament can also be injected into small cracks and pores. Location: leak stoppage & waterproof for basement wall, floor, the second joints, cracks, water seepage, etc. Structure reinforcement for beams, walls. Usage: 1, before starting, please confirm whether the switch of electric drill is in R (Forward) position or not. 2, Electric drill is not allowed to operate in the mode of hammer drill. 3, check whether the various parts of screw is off or not. High-pressure pipe and switch valve must be locked when junction. 4 regulating the speed of electric drill up to the maximum, the hand switch of electric drills at a fixed start, controlling operation in the switch of wire 5, axis and the pump have hexagonal copper screw cap (17 wrench) with thick Teflon for the leak-proof function. When injecting, if appearing oil spills there, please adjust copper screw cap to the appropriate level. 6, maximum instant pressure of the machine is 10000spi. When injecting, must consider the pressure degree of water-sealing needle for reducing the risk. 7, when operating epoxy resin, please do it within approved hours of epoxy resin operation, referring to the temperature of epoxy resin. If the temperature of epoxy resin appears to signs of rising, be sure to stop work immediately and use special cleaning agent cleaning the machine, making sure to clean up, indeed. 8, this machine is not allowed to inject the liquid with particles, such as resin mortar. 9, after finishing operation, make sure immediately cleaning the machine by the special cleaning agent for 2 to 3 minutes. After washing, stay the cleaning agent inside of the perfusion machine to avoid medicament residues resulting in jam. 10. Please wear your goggles when injection, avoiding to spray medicament into your eyes. 11, it is not allowed to pour the particles into the cup when pouring (to avoid scratching the pressure pump). With precision machinery, portable and convenience characteristics, SL-999 high pressure grouting machineexcludes the previous many defects and is a professional machine for structure injection with quick disassembly, maintenance easy & super high pressure, no needing air pressure source. Also, it can avoid the inconvenience of heavy machinery for workers and is the best choice for the persons who work on the professional water-sealing project. Besides, it can be raised to 5000spi work pressure within a few seconds, faster than other models in the perfusion time. Specifications: Weight: 7 kg Maximum output pressure: 10000psi Pressure of starting again: less than 7500psi Safe rangeof high-pressure pipe: less than 10000psi Safe rangeof switch valve:less than 18000psi Contact person: TracyMobile:15021395010Fax: 86- 0210-50828329