Место происхождения |
Guangdong China (Mainland) |
Бренд |
LM/OEM |
Номер Модели |
LM-725 |
Dome CCD Camera Model 725C 725S 725SN 725SNH Image Sensor 1/3-inch CMOS 1/4-inch SHARP CCD 1/3-inch SONY CCD 1/3-inch SONY CCD Effective Pixels PAL:628*582 NTSC:510*492PAL:500(H)×582(V)NTSC:510(H)×492(V)PAL:752(H)×582(V)NTSC:768(H)×494(V)Horizontal resolution 380TV Lines420TV Lines480TV LinesSignal format PAL/NTSCIR Wavelengt 850nmIR Distance 35MLens 3.6mm;6mm;8mm;12mm;16mm;25mmMinimum illumination 0.000LUX/F1.2 (LED on)Backlight Compensation AutoElectronic Shutter 1/50(1/60) 1/100,000secWhite Balance AutoS/N Ratio ≥48dBGamma Correction ≥0.15Video output 1.0Vp-p 75ΩSync System InternalOperating Temperature -20 to +60 RH95% MaxPower Supply DC12V±10%Brand LM/OEMInstallation Notes: (1) Do not use this product falls on the ground or by strong percussion; (2) unless instructed otherwise, do not dismantle the machine; (3) before use to determine whether the specified power supply voltage; (4) to avoid targeting light (such as sunlight, lighting, etc.), otherwise easily lead to too bright or pull light phenomena (this is not a failure), will also affect the CCD life; (5) Avoid wet conditions, dust, extreme heat, extreme cold, strong electromagnetic radiation and other venues; (6) If abnormal, please unplug the power and with the local dealer. (7) should be close to ground lightning ground. Installation and operating instructions: (1) first determine whether the correct supply voltage: DC12V, being outside in the negative. (2) with a 75Ω coaxial cable to transmit video signals to the monitoring equipment. (3) the appropriate choice of location of the camera fixed. (4) connected to the power and adjust the camera angle to the target location into view. System configuration list: (1) a camera; (2) a description; (3) a certificate;