HONKON: YILIYA-10600A

YILIYA-10600 ADVANTAGES 1.Three modes of laser energy output are selective: UltraPulse, CW and Fractional modes 2.Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more consistent, (compared to ordinary CO2 laser installed with glass tubes) 3.Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone. Therapists could adjust the spot density upon skin type, lesion parts and effectiveness requirement of different patients. 4.Various spot volumes are suitable for different area of the body which maximally avoid the side-effect that result from the overlap of the spot, reduce the pain during treatment, satisfy different therapists’ unique request. 5.12.1” TFT touch LCD, rotated 360°gives you a luxury enjoyment. 6.Reserved entry access for laser room ensures a safe treatment. 7.Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which will be offset by a much lower total cost of ownership. 8.Variable focus tips can adjust from 50μm-2000μm spot size which meet the need of surface or deep ablative of skin . YILIYA-10600 SPECIFICATION Laser Type RF-excited CO2 laser Beam Delivery 7-joint arm Optical Beam Quality TEM00 Power of the Aiming Beam ≤5mW Scanning Mode Randomized Scanning Cooling Air Cooling Spot Pattern Triangle/ Square/ Rectangle / Rhombus / Round Scan Area 5×5mm,2.5×2.5mm,1.25×1.25mm 30×30mm 20×20mm 10×10mm Spot Density 36spots/cm2,144spots/cm2,576spots/cm2 Power Supply AC 220V 50Hz / AC 110V 60Hz Wavelength 10600nm Maximum Output Power 30W/20W/10W(optional) Spot Size 50μm-2000μm Aiming Beam 635 nm Laser Operating Mode UltraPluse,CW,Fractional Pulse Energy 10mj 200mj (stepping: 2mj) Pulse Interval 1ms 100ms (stepping: 1ms) Net Weight 45KGS Gross Weight 88KGS Dimensions (before packaged) 650mm×340mm×760mm Dimensions (After Packaged) 760mm×455mm×975mm