H06-1 эпоксидной цинковый грунт Краска (двухкомпонентная)

H06-1 Epoxy Zinc Rich Primer Paint(two component) Product description ØBased on epoxy resin, superfine zinc powder, thickening agent, and solvent. ØPolyamide resin as curing agent, ØA, B two component packaged. ØExcellent Performance of cathode protecting, antirust. ØExcellent adhesive attraction, excellent oil and water resistance. Recommended uses Antirust primer for ship manufacture and repayment, gas tank, oil tank, bridge, and iron tower as well as antirust primer for zinc coated iron. Physical parameter ColorGray Gloss Matt Theoretic coverage250g/ Specific gravityAbout 2.30 Desiccation time23±2: surface dryness≤30min, Actual dryness≤24h Absolute solidification23±2: 7 days Flash pointA component: 24, B component :27 Storage12 months Operation description Mixing ratioA (paint): B (curing agent) = 35:3.5 Curing time23±2: 0.5 1 hour Applicable time23±2: 8 hours ThinnerX-7 epoxy paint thinner Operation methodAirless spraying Air spraying Manual brushing /Roller coat Max capacity of dilution20%20%5%Spout size0.4-0.5mm2.0-2.5mm-Spray pressure15-20Mpa0.3-0.6Mpa-Tool cleaningX-7 epoxy paint thinnerFilm thicknessWet film: 80um Dry film: 40um Attention Ø High zinc power contained. Suggest to mix around A component fully with machine, then put in the B component. Ø Adding thinner to avoid unable to spray caused by high temperature. Ø Zinc rich primer usually forms zinc salt. Eliminating zinc salt of the primer surface before operating subsequent paints. Or it will affect ply adhesion. Ø Avoid breath solvent vapor long time. Forbidden touching eyes and skin. Supply strong ventilation under narrow or unventilated condition. Protector is necessary. Packing specifications A: 35kg in 20L container, B: 3.5kg in 4L container anti rust coating, epoxy paint, protective coatings