Гравировальный станок RC 0609

This machineCNCEngraving machineRC0609is best choice for small piese woodworking, with dust hood on all three axises, it can stop dust away from the rails and ball screws, and to keep the machine working longer time. We use accuracy LM linear (HIWIN) for all three axis, with options like water slot, mist spray system...etc. the machine can work on wood, plastics, acrylic, even metal. WithT-slot table, holding the materials with clamps, High precision, you cando many jobs forsign mading, wood artwork.... All meterials for Sign making, even for wood working, molding. PARAMETERS NO. Discription Parameter 1 X,Y,Z Working Area 600x900x120mm 2 Table Size 720X1140mm 3 X,Y,Z Traveling Positioning Accuracy ±0.01/300mm 4 X,Y,Z repositioning Positioning Accuracy ±0.01mm 5 Table Surface T-slot Extrusions 6 Frame Cast Aluminum 7 X, Z Structure Ball Screw 8 Y Structure Hiwin Rail Linear Bearings and Ball Screw 9 Max. power Consumption 0.8Kw 10 Max.Rapid Travel Rate8000mm/min 11 Max.Working Speed 5000mm/min 12 Spindle Power Motor 1.5Kw water cooling spindle 13 Spindle Speed 0-24000RPM 14 Drive MotorsStepper system 15 Working VoltageAC220V/50/60Hz 16 Command Language G code 17 Operating System DSP System (Mach3 PC Software) 18 Interface USB 19 Flash Memory 128M(U Disk) 20 ColletER16 21 X,Y Resolution <0.01mm 22 Software Compatability Type3 software, Wentai software, (Option:Artcam software) Relative humidity: 30% 75%