графитовой пластины

Graphite plateis made into low ash raw material by high temperature graphitizing and ash handling treatment. Mainly used in electrolysis and electroplating industry. Classification Classing as geometry is stick and board series, as Physical and chemical indicators is senior and 1st grade. Physical and chemical indicators ItemUnitDiameter or thickness39-75100Senior1st gradesenior1st gradeResistivity <= µΩm7.59.07.59.0Ash <= %0.20.20.20.2Compression strength >= Mpa29292929Bulk density >= g/cm31.851.91.851.9Breaking strength >= Mpa16161616Vanadium content <= ppm10101010Note:please don’t measure Vanadium content if not used for mercury tank.Size of graphite anode stick and allowable toleranceSpecification, mmDiameter *LengthAllowable tolerance, mmTheoretical qualitykgDiameterLengthCurvature<=50*1000+-1.5+-1023.2065*10005.5065*13007.1075*13209.60100*132016.70Size of graphite anode board and allowable tolerance (used for diaphragm cell)Specification, mmL*W*HAllowable tolerance, mmTheoretical qualitykgLengthWidthHeightCurvature <=760*85*39+-5+-1.5+-11.53.20760*180*391.55.50960*180*3927.10Graphite anode processing can be done according to the drawings supplied by customers.