Готовые Полный Напряжение сращивания для ACSR

The preformed splice fitting couldbe divided into conductor, jump conductor and full splice for ACSR ,T-typesplice, preformed splice for galvanized iron wire strands and ground wire andsplice for concentric-lay-stranded aluminum-clad steel. According to thedifferent application environments and line materials ,every category of theproducts could be devided into three series:for ACSR,for concentric-lay-stranded aluminum-clad steel and galvanized iron wire strands.All the spliceare single preformed rods except the full tension splice for ACSR. The fulltension splice for ACSR consist of core plice,filler rods and outer splice. Trait: 1. For the conductor with singlematerial, such as alluminum, alluminum alloy conductor, the splice can renewthe mechanism tension of conductor entirely.That means 100% of rated fallingload of original wire. Also it can improve the conductivity of conductor. ForACSR, conductor spice could renew 100% strength of alluminum strands and 10%strength of steel core in the setting range. 2. Preformed conductor splice usedthe same raw material with conductor., so as to ensure the excellenct corrosionresistant. Different conductor need to use the suitable splice.3. The splice for conductor need tocover conductive sand with profect conductance in theinner layer to ensure the conductance after splicing.4. The installation of splice issimple, prompt and facility. The installation will not be affected by theelectriferous or not of conductor. It can avoid power cut when repairing theconductor.5. Thispreformedsplice fittings bear the excellence of light weight, high vibration resistance,good flexibility and they would prolong the serve life of conductor.