GM Tech-2 PRO Kit (Candi и ТИС), ГМ Tech2, Технология

GM Tech-2 PRO Kit (Candi and TIS), GM Tech2, Tech II Auto Scanner Description: The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008Features: Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles. Support for on-board diagnostics on all GM systems 1992 thru current year. Removable hardware modules provide insurance against scan tool obsolescence. Large, easy-to-read backlit screen. RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. Ability to view the status of vehicle diagnostic tests as they run. Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.Vetronix Tech-2 Specifications Dimensions 12×6×2 Microprocessor 32 bit, 16 MHz Memory 32 MB flash type II PCMCIA. Type III slot available for future expansion. Communications Integral RS232 communication port. Screen 3.8×2.8 backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):Tech-2 Flash Tester 32 MB PCMCIA Card with GM OE Applications CAN diagnostic interface module(CANdi) and GM aftermarket Expertec TIS software on DVD-ROM disks TIS2000 dongle to access SPS/Security features Data/Sensor/Trouble Code Manual DLC Cable, DLC Loopback Adapter 12V Cigarette Lighter Power Cable SAE 16/19 Adapter NAO 12/19 Adapter Battery Power Cable Storage Case An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash?s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.