Girafe PRE-668 High Grade Ацетокси силиконовый герметик

GIRAFE PRE-668Acetoxy Silicone Sealant 1.Characteristics: One component, RTV-1, acetic acid Curing at room temperature, low modulus silicone sealant; Excellent weatherproofing and anti-aging performance; Excellent adhesion to various building materials; 2.Main Purpose: Seal and joint for various aluminum-alloy windows and doors; Decoration engineering for glass indoor or outdoor; Other waterproof engineering. 3.Main Technology Data: PerformanceStandardMeasured ValueTesting MethodSlumpabilityHorizontalNot change shapeNot change shapeGB/T 13477Vertical(mm)≤30GB/T 13477Extrusion ml/min≥80450GB/T 13477Skin Time min≤18010GB/T 13477Hardness(HsA)20-6022GB/T 531Tensile Modulus Mpa>0.40.25GB/T 13477Tensile properNo damageNo damageGB/T 13477Storage12 months shelf life if stored below 27degrees centigrade in cool, dry places after the date of production 4.Application Standard: GB/T 14683-2003 5.Restriction of Usage: Not compatible with materials with grease or exudation; Unsuitable for the airproof location, because it is required to absorb moisture in air to cure; Unsuitable for the frosty or moist surface; Unsuitable for metal and coated glass; Unsuitable for the alkaline materials like marble,granite,etc Cannot be used on the substrate surface under 6 degrees centigrade or above 40 degrees centigrade 6.Technology Service We supply integrate data, technical consultation and free compatibility test. Solving problem in the course of using timely 7.Joint Design and Operation Procedure Please see "Operation Instruction to Girafe Silicone Structural Sealant" 8.Safety Silicone sealant will release volatile compound so that it could be harm to health, therefore, please keep good and ventilate; Silicone sealant will not release any harmful substance and anything harm to health after cured; Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor; 9.Warranty As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System. 10.Maintenance Generally there is no need to repair. If the seal joint is damaged, please remove the damaged silicone sealant, clean the surface of substrates, and fill up with silicone sealant. Girafe silicone sealants have good adhesion to cured sealant.