Гидравлический пресс Для присоединения изоляторов

Structure Principles: 1 Frame type, the inner hole and four pillars holes are working together. The seal of the cylinder can endure the high press and have wear resistance, to make sure the deformation will not happen. The cone sleeve is oxidative with cold mould. The mould is heat treated in vacuum. 2 The system adopts two hydraulic was to achieve fast giving. To provide the high quality, the hydraulic valve is imported from Taiwan. To low down the noise we install the vane pump. 3 The operating system comes from Omron, Japan and the human interface comes from Eview, Taiwan. 4 The acoustic emission passed the USA Inspection System, so the accuracy is high and the curve is shown clearly. Technical parameters: ModelJSJY4000-A/4000-BJSJY6000-A/6000-BThe greatest pressure relay4000KN6000KNScope of work210KN and below grade composite insulators can be a successful CrimpApplicable to all the hanging-insulator Press, 210 KN Crimp following a successful, more than 210 KN insulator Sec CrimpMaximum working pressure20MPa20MPaDie opening of the main workΦ120/Φ220Φ170/Φ340DieTwo sets (specifications for the 70 KN, 100KN ,160-210kn, 300KN)Two sets (specifications for the 70 KN, 100KN ,160-210kn, 300KN)Host weightAbout 2100KgAbout 2800KgCrimp the form of operationManual, semi-automatic, footswitchManual, semi-automatic, footswitchControl MethodComputer Control (with acoustic emission testing system)Computer Control (with acoustic emission testing system) The Moulds’ Specification and Corresponding Metal’s Specification, as Follow: insulator gradeMould specificationsCorresponding metal specificationsLengthInternal diameterCrimp lengthMetal external diameter≥70KN40Φ28.5±0.0140Φ29100KN55Φ31.5±0.0155Φ32160KN80Φ39.5±0.0180Φ40210KN300KNPressure Sec 50Φ45.5±0.01100Φ46