Гидравлическая Высокая стена

UNIT DESCRIPTION The FP-BM Series 2 pipe water high walls are terminals of a hydronic system for wall mounted installation. They can be supplied with chilled or hot water to form an air conditioning system. l Air flow rate from 270 to 2,300 m3/h l Cooling capacity from 1.4 to 12.0 kW in the standard configuration. l 4 sizes unit dimensions. STANDARD UNIT COMPOSITION High quality ABS unit casing, Elegantly designed unit panel with Digital Temp. Display.Air filter, synthetic washable filter, easily removable.Heat exchanger, made of copper tubes and aluminum hydrophilic fins, coil collector with air vent, partial drainage vent.Condensate drain pan, the high density polystyrene foam condensate drain pan, shaped in order to optimize the air diffusion.Fan motor assembly, cross-flow type balanced fan blower with 3 speeds motor.Electrical connections, the main PCB, capacitor, transformer, wiring terminal be fitted in electric control box inside of unit casing.Electric heater, (optional parts), the electrical ceramic heater with auto and manual overload protection.On/off control valve, (optional parts), pre-installed inside of unit case or for external installation, see spec. table.MICROPROCESSOR CONTROL SYSTEM-LCD wireless remote controller-LCD wired wall pad (optional)-Selectable operation modes, Auto restart-Weekly Timer, can set from Sat. to Sun. through the wired wall pad-Electric heater control, can set as heater booster or primary heater-Motorized on/off valve control-Self-diagnose, auto-protections and Error code display-Addressable Master-Slave group control for Max. 32 units-Port for BMS Host computer net control, Max. 2048 units