герметичность тестер для сжиженного нефтяного газа б

I. Overview and Purpose: Liquefied petroleum gas cylinders in the testing process, air tightness testing must be done to test bottles, valves and valve seat, threaded, etc. whether the leak. The easiest way is filled into the compressed air inside the cylinder, after sinking into the water does not leak check the leak. The role of this device is to be inflated on the cylinders after the framework, with the cylinder to drop and upgrading, reasonable structure, easy operation, suitable for liquefied petroleum gas cylinder manufacturing plant, and the use of gas cylinder test unit.2, Technical parameters: 1, applies to cylinder specifications: YSP-50 1 Zhi YSP-15 4 Zhi 2, to enhance cylinder specifications: QGA Φ125 × 550 MF1 3, cylinder thrust (0.6MPa): 736Kg 4, cylinder Rally (0.6MPa): 662Kg 5, pressure test gas supply pressure: 2.1MPa 6, the operation pressure of gas source: 0.6MPa 7, Weight: 400Kg 8, Overall dimensions (L × B × H): 2200 × 1380 × 21283, the structure description: This machine from the sink, lifting boxes, cylinder, pneumatic guns and composed of the console. After the installation of water tank used on the sink into the cylinder to leak check the tightness. Tank equipped with a lift of the bracket at the top of the cylinder, for lifting the lifting frame fitted with gas cylinders, lifting frame fitted with two kinds of nylon rollers and lower rollers to push into the cylinder, the wheel cylinder to hold him down so that it will not float and, when necessary, rotating cylinders by hand to observe the leakage points. The former is equipped with five inflatable tank guns, to be inflated on the cylinders, the console used to manipulate and to observe the movements of the cylinder gas pressure.