герметичная тестер для газового баллона природного

1, Overview and uses High-pressure cylinders in the course of testing, air tightness testing must be done to test bottles, valves and threaded plug any leaks, etc.. The easiest way is to charge in the cylinder to the use of compressed air pressure, the sink did not drain the water leak check. The role of this device is to be inflated on the cylinders after the framework, with the cylinder to raise and fall, reasonable structure, easy operation, suitable for cylinder manufacturing plant, and the use of gas cylinder test stations.2, the main technical parameters 1. Enhance the cylinder specifications: QGA φ125 × 500 MF1 2. Cylinder thrust (0.6Mpa): 736 kg 3. Cylinder Tension (0.6Mpa): 662 kg 4. Operation Air Pressure: 0.6 Mpa 5. Test pressure gas source pressure: natural gas, 20 Mpa (Other according to different blood pressure cylinders used) 6. Weight: 500 kg 7. Overall dimensions (L × W × H): 2300 × 880 × 28003, the structure shows This machine from the sink, hoist, cylinders, pneumatic clamping device and the console is formed after the water tank mounted on the sink into the water to be airtight cylinder leak checks. Sink stent coat lift cylinder, a cylinder for the upgrading of aircraft movements. Spirit is equipped with two sets of pairs of adjacent sink fixtures for different valve for filling the compressed air charge. Console used to manipulate and to observe the movements of the cylinder gas pressure.