Флотация сепаратор

Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc.It is large air-absorption and low energy -consumption. This type of flotation machine is formed by U through solid, hollow shaft inflation, suspension rotor and new type impeller. The cone impeller lean backwards, the blending quantity is big and the pressure head is small, the advantages are: simple structure and low energy consumption. Inside the impeller, there is air distributor, which distributes air into most parts of impeller evenly. Flotation machine working principle: The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months. Flotation machine technical specification: ModelXJK-0.35 (3A)XJK-0.62 (4A)XJK-1.1 (5A)XJK-2.8 (6A)XJK-5.8 (7A)Efficiencyvolumem30.350.621.12.85.8Capacitym3/min0.18-0.40.3-0.90.6-1.61.5-3.53-7Rotation Speedr/min470400330280240Blad diametermm300350500600750Motor modelY90L-4Y100L2-4Y132M2-6Y160L-6Y200L2-6 (255M-6)Y90S-4Y90S-4Y90S-4Y90S-4Y90L-4Power(kw)1.535.51122(30)1.11.11.11.11.5Weight/single trough0.430.861.382.333.533