феррита сегмент магнит / магнит дуги / магнитный STA

ferrite segment magnet / magnet arc / magnetic stator motor / segment magnet/ motor magnet/segment magnet for motor/ferrite arc magnet for motor/Y30BH magnet/Y10 magnet/C8 magnet/magnetic product,Anisotropic ferrite magnet,Isotropic ferrite magnet,permanent magnet, sintered ferrite magnet,barium magnetstrontium ferrite magnet/ Anisotropic ferrite magnet description: We have rich experience in supplying Europe motor users, we have TS16949 certified. We had pleased to supply full set of PPAP reports with samples to you Ferrite (ceramic) magnets are essentially composed of oxide materials with barium carbonate or strontium carbonate, manufactured under a powder metallurgical process The feature of low recoil permeability, along with the high coercive force, makes them highly resistant to demagnetizing fields. In addition, their relatively low specific density and economical cost are also very attractive to the magnet designers. When designing the ferrite magnets for a particular application, primary consideration should be given to its shape limitation due to the powder metallurgical manufacturing process and the temperature dependence of ferrite materials Ferrite magnets have good anti-corrosion performance, no surface treatment needed. There are two manufacturing process for ferrite magnets: dry process and wet process. By dry process, can produce isotropic & anisotropic magnets; by wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets are not oriented and can be magnetized in any direction; anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation. For dry process, the tool can be changed and developed easily, while for wet process, it is complicated to change the tool and the tooling charge is much higher. At present, we have put our emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications We specialize in ODM and OEM various magnet rotors for motors. Magnetic rotors which are made by plastic injection outside NdFeB magnets or ferrite's in can, high in efficiency and working with low noise. They are widely applied in cars, water pumps, disk drivers, starting motors of motor bikes and stepping motors