ETCR1000A Индикатор чередования фаз - ISO, CE, OEM

ETCR1000A Phase Sequence Indicator------------------------------------------------------------------------------------------------------------------------------ Product Features: 1. LCD display mode: HTN luxurious blue screen 2. Continuously using 200 hours, Low battery warning and auto power off 3. Meets IEC-10101 (EN61010) safety requirement 4. Electricity range: AC60600V,40 Hz70Hz( continuous sine wave input ) 5. The highest detected voltage: AC600V 6. Insulating Strength: 5.4kVrms 7. Safety suitable for: 100Mva 8. Dimension (mm): 70*75*30 9. Weight (g): 270 ------------------------------------------------------------------------------------------------------------------------------ . Introduction Non-contact phase sequence detector ETCR1000 is completely independent of traditional phase-sequence detecting methods which must poke the wiring posts of three-phase wire and connect the three bare alligator clips or testing pins of Phase Sequence meter to the three bare fire wires. ETCR1000 conducts the pincers-like non-contact inductive measurement instead of poking the wires and contacting the bare high-voltage fire wires. It directly uses the three super-inductive high-insulating pliers to clamp the insulating sheath of three-phase fire wires, respectively to detect the phase sequence. At the same time, it displays the positive-phase or negative-phase state of phase sequence in three-phase power supply. The three super-inductive and high-insulating pliers of ETCR1000 are made of Permalloy which has high magnetic Permeability in Weak Magnetic Field. So the sensitivity and reliability have been improved significantly in detecting induction. Moreover, the display window is made of a wide and luxurious LCD blue screen. Its displaying effect is clear at a glance. ETCR1000 features multifunction such as live-wire detection, simple electricity detection, live wire detection, fault phase check and broken wire locate, line overhaul, etc. ETCR1000 boasts the characteristics of being safe, time-saving, rapid and convenient, which improve the safety of in situ test dramatically, strengthen the protection of operators personal safety and accordingly enhance the productivity! It is a safety instrument involving phase-sequence detection, motor detection and line maintenance of three-phase power supply! ------------------------------------------------------------------------------------------------------------------------------ . Technical specifications Function phase detection (positive phase and negative phase) live-wire detection and simple electricity detection LCD size(mm) 40*33.5(mm); Display region: 38*26 LCD display mode HTN luxurious blue screen. Electricity range AC60600V,40 Hz70Hz( continuous sine wave input Size of wire for clamping Insulated wire with outer diameter 18mm compatible with wire of 120mm2 Display Positive Phase 4 phase-detecting lights and 1 arrowlight; the lights will be turned on in clockwise. Negative Phase 4 phase-detecting lights and 1 arrowhead Light; the lights will be turned on in anticlockwise Electricity the light R-S, S-T are on in the voltage setting range Default Phase the light R-S S-T are off Power-on Indication after being started, the backlight of LCD, and power-on indicator will be on Automatically power off Automatically power off Dimension (mm) 70mm×75mm×30mm Lead wire plier length 0.5m Weight(g) 207g Working temperature and humidity -1055 80%rh below Storing temperature and humidity -2060 90%rh below The highest detected voltage AC600V Insulating Strength 5.4kVrms Safety suitable for 100mVA Safety suitable for EN61010-1 2001 EN61010-031 2002 pollution level 2, CAT (600V) Instantaneous Overvoltage 6000V. Packing Phase Detector: 1 piece; strap: 1 piece; Carrying Case: 1 piece