эпоксидная металла

Main Component: A component is the modified Epoxy Resin and mucus, B component is modified Sulfur Curing Agent and mucus. Scope Of Application: The products of this series are widely used for bonding all kinds of hard material, like iron, casting iron, steel, aluminum, glass, pottery, graphite, concrete, cement etc. And they could be applied to bond and repair in the field of daily households, home appliance, artworks etc. Using Method: 1.The surface should be clean and dry, without oil or wax 2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly, 3.Press it according to the actual condition.. it could achieve the using intensity after the solidifying for two hours during the normal temperature, it is suggested to operate at above 5°C. Warning: 1.It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess to much. 2.Tighten the caps after usage .Do not mix the cap of part A and B. 3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying. 4.Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation. 5.Take strict precautions against touching by the kids and entering into the mouth. Storage And Packing: 1.Stock the products with air-tight seal in the environment of shade and dry. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life. 2.Preserve and transport as non dangerous products. 3.Packing specification: syringe load in blister card, 144 pcs/ctn