Энергосбережение пожимая таблицу

Energy-saving shaking table Application: Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials. There are many applications where the concentrating table is of particular value and cannot be equaled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals. Construction : Head Motion:The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump. Decks :The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at ±50. Feed and Water Box :A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water. Base:A choice of ordinary type, groove steel support or big channel steel support is available.Technical Specification: Thewinner Shaking Tables have three distinct deck designs available. The course ore deck is designed for recovering particles sized from 0.5 mm to 2 mm; the fine sand deck is designed for recovering fine particles in the range of 0.074 mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.05 mm to 0.074 mm. Technical parameters: NameUnitCourse ore DeckFine sand DeckSlime DeckDeck SizeLengthmm445044504450transmission end widthmm185518551855Concentrate end widthmm154615461546Maximum Feeding Sizemm20.50.15Feeding AmountT/H30-6010-2015-25Feeding Density%25-3020-2515-25Strokemm16-2211-168-16Frequencyf45-4818-5350-57Water addedt/d80-15030-6010-17Transverse slope of Deck°2°30-4°301°30-3°301°-2°Longitudinal slope of Deck°1.40.92------Beneficiation Aream27.67.67.6Cross-section Shape of Deckrectangularsaw toothtriangleMotor PowerKW1.11.11.1Transmission MechanismEccentric linkage 6-SFixedTypeshaking table Without mounting bracket,the use of the installation takes the mound to cement casting pile to put shaking table,not convenient to move,butrelativel save cost,users can according to the economic situation to decide. 6-S Shaking table The first product on this page winth channel bar,easy to install.just need pour cement to channel bar,embedded anchor bolts for equipment foundation.The effectness is same compare with the one have bracket.The price is reasonable.being loved and esteemed by the customers.We recommened order this one. 6-S Big channel bar bracket shaking table 6-S have the same effectness as the common bracket,but no need poor cement to embedded anchor bolts.Easy to install and move,Especially suitable for rough surface,sand ground and virtual earth's surface.