Энергетические напитки наполнения машины

3-in-1 mono-block is composed of rinser, filler, capper, frame, sealing window, main motor and transferring system, cap unscramble and electric control system etc. Main features: 1. Full filling is to avoid the bottle from sinking after the bottle cooling off, and to decrease the dissolved oxygen to the utmost extent; 2. Filling machine connected with UHT directly in order to reduce pollution. Filling machine is equipped with a CIP cleaning glass, filling valve can be effectively cleaned, Protection of internal and external wall filling valve clean and sterile; 3. Disinfection rinser, filler, capper, transition click-wheel and other non-rotating parts are isolated by fluid slot, the effective protection of bearings and other steel parts from disinfectant Corrosion; 4. The machine Equipped with 100-level air purification system and the isolation window and inlet and outlet of the bottle with air clean curtains, it can prevent dirty air into clean room. Sealing windows with lots of isolation gloves is convenient for maintaining. The facility equipped with external spray sterilization and room-cleaning fumigation system; 5. The machine adopts that air conveyor connected with thumbwheel directly instead of screw and conveyor chains, which is easy to bottle change, it’s just replace star-wheel, inlet bottle screw and arc guide plate; 6. There is no need to adjust the height of equipments through neck holding tech for bottle transmission. And what is only to simply replace the bottle diameter related arc guide board, thumbwheel and nylon fittings etc; 7. Specially designed bottle clip is made of stainless steel and durable, non-contact bottle-screw part, to avoid secondary contamination,no process dead angle, which is easy to clean. Bottle blowing The filling machine Filling Cappingmachine