Электрическая печь

Electric oven electric operating instructions1, check the box on the power supply operation indicator light is bright, as light indicates normal power supply. 2, open loop fan Kai / off knob, so that fans operate normally. Third, set the temperature controller of the upper and lower temperature, usually set the temperature required for the actual process temperature of 90%, under normal production conditions are not required to operate this step. Another re-set the production process required drying time, the timer in seconds (0 9999 seconds). 4, open the heater start / stop knob, this time heated oven began to heat up. 5, when the temperature rose to process the required temperature, timer power to begin drying time to time on the workpiece, when the time to reach the required process when the heater will automatically shut down timer at this time also shows that the total time time, Heaters should be at this time start / stop switch to stop the state, open the oven door pull the workpiece. 6, For re-drying the workpiece, the method according to the above operations can be. 7, shut down, the heater must be off, then off circulation fans, the last off the total power supply. Note: The drying oven 48 each time 15kg LPG cylinders, equipment, total power 30KW circulation fans must be started, otherwise the heater will not start the work.