E06-3 неорганической цинковый грунт Краска (два компо

E06-3 Inorganic Zinc rich Primer Paint (two component) Product description ØBased on zinc powder, ethylsilicate, adding with high malecular compound, fillers, solvent etc. ØA, B two component packaged. ØSelf-curing shop primer, excellent outdoor age resistance. ØHigh zinc power content. Excellent cathodic protection ability. ØExcellent weather resistance, bearing long time aeolian erosion. ØExcellent oil resistance. Recommended uses ØUniversal antirust primer as well as single anticorrosion coating. Ø Anticorrosion primer for steel structure. Physical parameter ColorGary Gloss Matt Theoretic coverage350g/ Specific gravityAbout 1.60 Desiccation time23±2: surface dryness≤10 minutes, Actual dryness≤24 h Absolute solidification23±2: 3 days Flash point13 StorageA: 12 months; B: 6 months Operation description Mixing ratioA: B = 4: 1 Curing time23±2: 0.5 1 h Applicable time23±2: 8 hours ThinnerX-11 inorganic zinc coating thinner Operation methodAirless spraying Air spraying Manual brushing /Roller coat Max capacity of dilution30%30%5%Spout size0.4-0.5mm2.0-2.5mm-Spray pressure15-20Mpa0.3-0.6Mpa-Tool cleaningX-11 inorganic zinc coating thinnerFilm thicknessWet film: 180 um Dry film: 60 um AttentionØ High zinc power content. Suggest to mix around A component fully with machine, then put in the B component. Ø When the temperature is between 30 60,adding thinner to avoid unable to spray. Ø Eliminating the zinc salt of the surface fully before operating next layer. Or it will influence the adhesive attraction. Ø Avoid breath solvent vapor long time. Forbidden touching eyes and skin. Supply strong ventilation under narrow or unventilated condition. Protector is necessary. Packing specificationsA: 30kg in 20L container; B: 7.5kg in 10L container anti rust coating, anticorrosive coating, primer coatings