Двухместный наконечник Стекло сверлильный станок Яр-HD-5/80

Glass drilling machine: 1. Two drilling spindles, one at the lower side and another upper. When the glass is put on the table, it is fixed pneumatically and the lower spindle will rise up automatically to drill from the bottom side if the glass. Then the upper spindle will drill the top side of the glass and thus, the hole is drilled through. 2. The cooling water runs inside the core drill so that the cooling effect is directly acted onto the glass without any loss. 3. Tapping or chamfering can be made on the hole for particularly purpose. 4. The spindle design is sophisticated such that it is strong enough for 24 hours running a day. The rigid and anticorrosive spindle enables maintenance free. 5. Customer designed drilling machine alvailable. With extra hole diameter, glass size. Also able to drill holes on water sink. Model Number YD-HD-5/80Distance from hole centre to C-stand (mm)1000Hole diameter(mm)5 80Glass thickness(mm)3 19Concentric tolerance(mm)±0.2Compressed air consumption (IT/min)0.6Pressure (kg/cm2)8Power (kw)2Outer dimention (m)2.2 x 2 x 1.6Weight (kg)500