Двойное стекло производство машина

Detailed introduction of this double glass machine: Machine introduction: 1. This machine is used for producing insulating glass. 2. The washing section is made of full stainless steel, it is consisted of washing box, brush box and drying box, and it is connected with a powerful blower. In the washing box, there are 2 pairs of soft brushes, so it can wash coated glass, too. Two water boxes can supply water for washing and brushes separately, and the water path is circulatory, which is water-saving and clean. The powerful blower adopts loop air path to avoid static effect, and washing effect is high. 3. The front press panel adopts vacuum sucking holes system instead of rubber sucking disc. The sucking is powerful. The back press panel adopts air flotation conveying. Automatic press between the panels, the press effect is good, and fast speed. You can set the stop time and pressure according to glass, aluminum spacer and butyl rubber. 4. It is equipped with frequency converter to control the processing speed. 5. It is controlled by PLC and has HMI. Equipped with sense switches to sense the glass location to control the frequency converter speed. And it can be equipped with a Low-e sense system, it can sense Low-e coating automatically and give an audio and shining alarm. Technical parameters Voltage 380V 50Hz Power 13Kw Max processing size 260×300mm-1600×2200mm Single glass thickness 3-8mm Conveying speed 6-29m/min Max insulating glass thickness 55mm Output per 8-hour 300-500 sheets Dimension 13000×2350×2580mm Weight 3500kg