DSP CANBUS комплект ксенона HID

DSP xenon hid kit The first TRUE DSP BALLAST IN CHINA No need extra error canceller package out side Low current for 12V35W Input current: less than 5.5A normal current: 3.2A and less for 12V55W Input current: less than 4.5A normal current: 4.2A and less ------------------------------------------------------------------------------------------------------ The set is composed of 1. 2 DSP ballast (Model No.: FS01) 2. 2 Single lights 3. 2 Fixing Pads 4. Screws and Wiring's 5. Users' Manual 6. Color Box ----------------------------------------------------------------------------------------------------------------- Ballast Ballast Parameter( Model No.: FS01) 1. Working voltage ranged: 9 to 16V DC 2. Working current: 3.2A (at 12V DC) 3. Input voltage: 12V DC 4. Input current when turn on the light: <5.5A 5. Instantaneous voltage when turn on the light: 23 ±1kV 6. Output power: 35 ±0.5W 7. Working temperature range: -40 to +105 degrees Celsius 8. Output load: one HID 35W lamp 9. EMI electromagnetic compatible standard to the ballast: S95, 54 and EC 10. Reverse polarity protection ; Short/open-circuit protection 11. Shock, water and dust-resistant protection 12. Size: 9.6 x 5.8 x 1.5cm Ballast Features 1. Cold light low current, quick start light 2. DSP intelligent start, no impact on light bulb, prolong the life more than three times 3. Intelligent power compensation, stable brightness output 4. Low pressure drop power, safety protection original car circuit 5. Fewer Components, less consumption, high efficiency, low temperature and low failure rate 6. With CAN-BUS design, fully inhibit transmission, radiated interference. Never interfere with the original car appliance 7. Installed directly on any car models, without any auxiliary decoder ------------------------------------------------------------------------------------------------------------------------ Bulbs 1. Bulb Type: H1, H3, H7, H8, H9, H10, H11, H13,HB1, HB2, HB3, HB4, HB5 9003, 9004, 9005, 9006, 9007, 9008, 9140, 9145 880, 881, 886, 889, 893, 894, 89, 898, 899 (all 800 series available) D2S, D2R, D2C-- D2S, D2R, D2C kits require a wiring harness that is sold separately 2. Color temperature: from 4300K, 5000K, 6000K, 8000K, 10000K, 12000K,15000K to 30000K ------------------------------------------------------------------------------------------------------------------------ The following tests are carried out before delivery. 1) 6 hours continuous working aging test 2) Connection circuit protection test 3) Over voltage protection test 4) Flash light concussion test 5) Quakeproof capability test 6) Cold, warm boot test 7) Polarity protection test 8) Short and circuit protection test 9) EMC anti-jamming test 10) Ballast and bulb matching test