Место происхождения |
Jiangsu China (Mainland) |
Бренд |
SGM |
Номер Модели |
WC-6 |
WC-6 WC-8 WC-10 Wood Chipper / shredder, CE & TUV approved This is a 6" or 8" PTO-driven wood chipper for use with most tractors. This machine complies with all required safety distances and recommended safety mechanisms. You can sell these to landscape gardeners, farmers, schools, equestrian centres.Operation of the wood chipper is very straightforward. You just increase the speed of the engine until the chipper is running at 540 rpm, then place wood, branches etc into the feed hopper. A feed roller pulls the wood in to the chipping blades, and the chips come out of the output chute. If you push against the safety bar, the feed roller immediately stops and stays static until actively re-enabled. It is also impossible to get yourself near the feed roller or chipping blades.Our PTO wood chipper has gotten CE, TUV certification already, it is the most reliable wood chipper on the market, at the guaranteed lowest price. It can easily tear through a 6" branch, mulch a pile of leafs, and shred brush. This chipper will work on any tractor with a 3 point hitch.The wood chipper features a fully adjustable debris deflector on the exhaust chute that allows you to easily raise or lower the angle of the chip stream. Also have 360 degree rotary implements on exhaust pipe, so the exhaust pipe can be easy rotary 360 degree. This unit runs on a standard PTO shaft, which is included with the chipper. This tractor implement will work on just about any tractor. WC-10 wood chipper with hydraulic motor and double roller, it's hydraulic feedingMain Specifications: MODELWC-6 wood chipperWC-8wood chipperDIMENSIONS (L×W×H)1680×1400× 1620mm1680×1400× 1620mmSTRUCTURE WEIGHHT370kg380kgRADIUS OF BLADE DISC302mm302mmCHIPPING DIAMETER150mm200mmWORKING EFFICIENCY7 -8 m³ /h8 -9 m³ /hPTO TURNNING SPEED540r/min540r/minPTO SPLINE6×8× 520mm6×8× 520mmPOWER REQUIREMENT25-35hp30-55hp