дизель насос испытательном стенде

test machine CharacteristicsFunctionsTechnical ParametersChanging frequency changing rotation speed;Small fall of rotation speed and large output torque;High measurement precision;The functions of over voltage ,overload and short circuit protection;Ten kinds of rotation speeds presetting;Constant temperature controlled;Ultra low noise;Operating position: arbitrary side of the two work sides of the test stand;Advance angle, rotation speed, count, temperature and air pressure are displayed on 15"CRT or LCD; (May selection)Built-in air resource;Data can be searched and printed. (May selection)Measurement of each cylinders delivery at various rotation speeds;Checking of each cylinders injection time with static state;Checking of the mechanical speed governors;Checking of the electric magnetic valve of distributor pumps;Checking performance of the pneumatic speed governors;Checking of the pressure compensators ;Measurement of the reflux delivery of distributor pumps; (May selection)Measurement of the internal pressure of the distributor pumps body;Checking of the pneumatic speed governors, vacuum performance; (May selection)Measurement of rack travel; ( May selection)Measurement of advance angle; (May selection)Checking of the sealing of fuel injection pump body .Adjustable rotation speed range:0 4000r/m;Double Series graduates:45cc150cc;Volume of oil tank:60L;Temperature stabilization:40±20C:Test oil filtering unit:5μD.C.Supply12v/24vFeed pressure: low:0 0.4Mpa.high:0 4Mpa;Air pressure:0 0.3Mpa;3-phase power supply: 380V/50Hz or on request;Flywheel inertias moment: 0.8 Kg.M2;Center height: 125 mm;Output power: 5.5KW7.5KW11KW and 15KW or on request;Overall dimensions(mm): 2370×960×1880Net weight (KG):1200.