диспергатор и чернила жирной покрытия добавки

dispersant 928 One, technical indicators Appearance : light brown liquid Density 30 g / m :1.00 - 1.10 Viscosity 30 mpa.s : ≥ 500-800 ND : 1.500 ± 0.01 Two Overview 928 is a new type of dispersant, to its superior performance and wide range of application, high decomposition temperature can raise a variety of Yan, fillers and various resin compatibility, particularly applicable to the different nature of the same paint system for the coating as dispersants, anti-Shen agent. In particular, can improve the conductivity of conductive ink. 3, uses Applies to fill in the filled resin modified, but also for the epoxy and polyester thixotropic agent. In polyethylene, polypropylene, polystyrene, PVC, acrylic resins, alkyd resins, melamine resin, polyester, rubber and most other polymer. Dry applicable to most of inorganic fillers, such as calcium carbonate, talc, kaolin, wollastonite, fiberglass, silica, titanium dioxide, especially for carbon particularly effective. While phthalocyanine blue organic pigment is very high dispersion effect. Products decomposition temperature of up to 290 ° C, high temperatures applicable products. Different systems can be used as a solvent-based coatings decentralized, anti-Shen. 4, usage 1. For coating : general dispersant addition of the filler 0.5% -3%, the amount recommended for 1-1.5%, packing a few more heads and a small amount of dispersant to the corresponding increase in volume from the best experiments. 2. For Plastics : Fill in the first high-speed mixer Agitation drying about 3-5 minutes (temperature of 100-110 ° C), then joined the uniform measurement of dispersant (General dispersant first solvent such as 15 # white oil industry to mixed 1:1 dilution ratio), we continue to increase after Stir 10-15 minutes, plus other components can be stirring. 5, packaging 25, 50 KG plastic barrels packaged, sealed room temperature preservation, valid for one year.