DIN-рейки AC / DC импульсный источник питания (DR-75-24)

Din Rail AC/DC switching power supply(DR-75-24) Features: 1)AC input range selectable by switch 2)buit-in EMI filter 3)protections:short circuit/overload/over voltage/over temperature 4)cooling by free air convection 5)Can be installed on DIN equipment listed 6)UL 508(industrial control equipment) listed 7)100%full load burn-in test ModelDR-75-12DR-75-24DR-75-48DC output voltage12V24V48VOutput voltage range(Note:2)±2%±1%±1%Rated output current6.3A3.2A1.6AOutput current range0-6.3A0-3.2A0-1.6AWave and noise(Note:3)100mVp-p150mVp-p240mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%Load stability(Note:5)±1%±1%±1%DC output power75.6W76.8W76.8WEfficiency76%80%81%Adjustable range for DC voltage10.8 13.2V21.6 26.4V%43.2 52.8V%AC input voltage range85 264VAC 47 63Hz;120 370VDCInput current1.8A/115V 0.9A/230VAC inrush currentCold-start current 30A/115V 60A/230VLeakage current<3.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: tuto recoveryOver-voltage protection13.8 16.2V27.6 26.4V43.2 52.8VTemperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time1000ms, 60ms, 50ms/230VVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvACIsolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHOverall dimension55.5×125.2×100mmWeight0.551Kgs 20PCS/14Kg/1.1CUFTSafety standardsMeet UL 1012 requiement (Not apply for the mark)EMC standardsMeet FCC PART 15 J Conduction class BNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%