DIN 24256 / ISO 2858 конец всасывающей центробежных насосов

ISO 2858 / DIN 24256 end suction centrifugal pumps. We have rich experience of OEM production for many international brands across ITALY, SPAIN, USA,etc. The DIN 24255 /EN 733 end suction centrifugal pumps has been used widely in the following field. 1. Civil Engineering water supply. 2. HVAC Projects 3. Irrigation 4. Fire fighting. ISO 2858 /DIN 24256end suction centrifugal pumps Design: Horizontal,single,and end suction centrifugal water pump with volute casing and back pull out design. Pump and Motor are seperate components and connected to each other via felexible coupling. Maintenance is easy, the impeller, shaftand other rotating parts can be removalbe with no need to disconnect the suction and delivery pipes. Only four types of shaft and five types of bearing housing need to be used for all the models.So the broken parts can be easy to be interchanged. Spacer coupling is used to avoid the movement of driver or pump casing when the pump is on maintenance. (ISO 2858 /DIN 24256end suction centrifugal pumps) Pumped Liguid: Thin, clean, non-aggressive and non-explosive liguids. Liguids should be free from large solid particles and fibres. (ISO 2858 /DIN 24256end suction centrifugal pumps) Shaft Seal: 1.Gland Packing; lantern Ring is used for water sealing and lubrication of packing. 2 Mechnical Seal: Standard: Alloy-Alloy/Viton, other type can be choosed by the buyer. . (ISO 2858 /DIN 24256end suction centrifugal pumps) Flange: DIN2332 PN10RF, Optional ANSI B16.5 Class 300lb. Technical Data: Flow: 2-1100m3/h Head: 2-150m Temperature: -10°C--150°C Operating Pressure: 10Bar, Optional 16Bar. The largest size we make isDN300 (ISO 2858 /DIN 24256end suction centrifugal pumps)