Дешевые Раймонд Grinder

SpecificationsRaymond mill is used for ultra-fine powder processing of 280 materials, with the Moth's hardness of 9.3 below and humidity of 6%Detailed Descriptions ofRaymond Grinder Raymondmill is used for ultra-fine powder processing of 280 materials, with the Moth's hardness of 9.3 below and humidity of 6% below, in the works of non-flammable mine, chemical industry and building materials, etc. The materials include barite, calcite, potash feldspar, pencil stone, marble, dolomite, fluorite, limestone, active carbon, bentonite, etc. The particle size of finished product can be adjusted from 80-325 meshed. And it can reach 2000 meshed at the maximum.Raymond GrinderOperating principle: The whole machine is collocated with jaw crusher, elevator, hopper, electromagnetic vibrating feeder, main unit, classifier, collector, cloth deduster and high-pressure blower. The working principle is as follows: load the stuff for grinding evenly and continuously into the grinding chamber of the main frame. Due to the centrifugal force in rotation, the roller swings go outward and presses closely upon the ring. The shovel carries the stuff to the space between the roller and ring. When the roller rolls, the stuff is thus grinded. After being grinded, the stuff is to be routed to the classifier along wind belt of the blower and the rough powder will be put back to the grinder for regrinding. The fine powder flows into the cyclone collector together with air flow and is expelled from the powder output pipe as product. In the grinding chamber, since the stuff contains moisture to some extent, the heat generated during grinding makes the moisture evaporate; since the pipeline joints are not airtight, the external air is sucked in and the circulation air mass increases. In order to enable the grinder to work in negative pressure, the increased air flow is guided to the deuster and sequentially to the atmosphere after purification.Technical Parameters ofRaymond Grinder:Typeparameters6R45255R41194R32163R3016 4R30163R2715 4R27153R26153R21153R1410Input size(mm)≤30≤25≤25≤25≤20≤20≤15≤15Output size(mm)0.125-0.0440.125-0.0440.125-0.0440.125-0.0440.125-0.0440.125-0.0440.125-0.0440.125-0.044Shift output at defferent material fine degree16-1208-604-453-352-281.5-201-180.5-8Rotating speed of central shaft (r/min)82105130160160160180280Inner diameter of Pulverizing ring (mm)16201270970880830(800)780650410Diameter of Pulverizing roller (mm)450410320300270260210140Heightof Pulverizing roller (mm)250190160160150150150100Main Motor (KW)y315m-4-32y280s-4-75y225s-4-37y225m-8-30y225m-8-22y225s-8-18.5y200L-8-15y160m-6-7.5FanMotor (KW)y315m-4-132y250m-4-75y200L-4-37y180m-4-22y160L-4-15y160L-4-15y160m-4-11y132s-2-5.5Motor (KW)y160m-4-11yc200-4B-7.5yc120-4A-5.5y112m-6-2.2y112m6-2.2y112m-6-2.2y112m-6-2.2y90L-6-1.1