День Время Запуск свет / LED DRL

Product DescriptionDRL, Daytime running light kit1. Specification:1). Product name: LED Daytime Running Light(LED DRL)2). Model: D033). Whole kits Consist: Two LED lamps kits (Left one and right one), wiring, one gift box, user manual4). Lamp Consist:Electronic circuit board, viewfinder, wiring, lamp hull and housing;5). Electronic circuit board:6) high-power LED and Controlling gear2. Major Technology Parameters of D03:1). Rated Working voltage: DC 12V and 24V;2). Rated Working current: 0.88A and 0.44A;3). Rated Power consumption: 10.56W;4). Maximum surface temperature: ≤ 503. LED bulb technology parameters:1). Bulb Color temperature range: 6, 000K-7, 000K;2). Power: 1Weach LED bulb;3). Rated working current: ≤ 300 Ma;4). Current stablilty≤ ± 2 mA;5). Brightness is between 70 to 90 LM4. Electronic Protection:1). High-Voltage Protection:The control system will stop working automatically to protect the control module from damage when the power voltage is higher than 15.5V, then LED light only works by the outer power directly;2). Low-Voltage Protection:The LED light will shut off to protect the system once the voltage is lower than 9v;3). Lose-Frequency Protection:The LED light shut off once the control frequency is abnormal to protect the control module and LED light.4). Wrong-Connection Protection:It is no harmful to circuit when the three cables of LED were connected incorrectly. The LED light is off when connection is incorrect, it will be on when connection is right. The three cables of LED light are VBB, Vss and VC respectively.5. Other characters:1). Anti-Vibration:The Anti-vibration character of the LED DRL is accord with the requirements of the automotive relevant technical specifications.2). Waterproof and corrosion-resistance:The waterproof and corrosion-resistance of the LED DRL is accord with the requirements of the automotive relevant technical specifications.3). Appearance:The appearance of the LED DRL hasnt obvious depression, rip, deformation. And it has clean and smooth surface without burr, light scratches, dirt, bubble, such as no more than 3 PCS. There are not obvious white granules inside the light housing and viewfinder.4). Packing:The whole kits should include left LED light and right LED light, one cable assembly, two metal hasps for installing. All parts are placed into three inside small boxes with a manual installation.