DC сенсорный 7 '' сенсорный экран для автомобилей GPS

Descriptions: 1.Our products' insulation point is Φ0.03mm,this technology is advanced. 2.Various choices of surface treatments available,anti-Newton,anti-glare,special chemical stenghen hard coating,anti-reflection. 3.Capable of handing spacer dots diameter is less than 0.035mm. 4.We have our own factories,so our price is competitive. 5.The excellent sales service. Specifications: Surface Hardness 3H Optical Clarity 80%↑ Operating Temperature -10C 60C Endurance Test strikes Over1million Operating Voltage DC5V Resistance 200Ω 900Ω Linearity 1.5% Faceplate Surface Anti-glare coating,glare coating Film Thickness 0.175mm, 0.188mm Glass Thickness 0.7mm, 1.1mm,1.8mm Operation Pressure 20 150g Storage Temperature -30°C 80 °C Message Noise 5m sec 15m sec Operating Current 5mA 25mA Humidity <95% Isolation Resistance 20MΩ↑ DC25V Sealable against dust ,water, oil , static Resistive touch screen is the preferred solution for low cost applications. It is consisted by a conductive bottom layer (ITO Glass or Film) and a conductive top layer (ITO Film). The two layers are suspended by a lot of mini-spacer dots. When a certain point is touched, the top layer contacts the bottom layer and a voltage charged by the controller is applied to the bottom layer's electrodes. The coordinate X axis of the touch point can be detected by measuring the voltage value through the top ITO layer and the coordinate Y axis of the touch point can be detected in the same way by changing voltage input to the top layer's electrodes.