CY250D Ложные две-к-одному Twister

CY250D False Two-for-one Twister Feature 1. CY250 can produce steaming fold filament from wire silk by one step which will reach to the effect of real like silk. 2. The machine has high flexibility which not only can be used as ordinary two-for-one twister, but also can be used for twisting constant heat-setting yarn. 3. Inset ceramic piece in filar guide is used for yarn breaking. 4. Inset ceramic piece in over-feed fixes in two independent drive axis, which is used to control the tension of yarn precisely during the setting and winding. 5. The silk wheel is equipped in each over-feed can be adjusted tension of both take-up and inner heater pipe. 6. The yarns refueling device in the machine is an automatically device to fill center fuel tank.(For choice) 7. The machine is equipped with automatic tag-ending device. (For choice) 8. Yarn is in the inlet of heater pipe which has a ceramic silk wheel to lesson the tension of yarn. 9. The computer system control the temperature of heater pipe, which can monitor whether the heater pipe is at normal work or not and working conditions, and the effect will be showed on the computer. 10. The exhaust emission system is connected to users central control system. 11. The machine is equipped with magnetic false-twist spindle which is easy to operate. 12. Gear case is used for winding, with lip motion device for the soft edge. 13. The control of the whole machine is all installed in the control casing at the head of machine (spindle, false twist spindle, over-feed device and change of twist range). 14. The whole machine carries out digital monitor by a set of software, including: spindle speed, false twist spindle speed, over-feed rate, take-up speed, yarn meter counter, alarm display, working hours, procedure memory and twist direction(S or Z), etc. Technical Parameter Form of operation Double sides and single layer, thread manually Number of spindles 14n, 168 spindles are standard Spindle Spindle speed range 2500 13000r/min Twist range 60 2777t/m Yarn count range 33 330D Max. package diameter of supply bobbin Max. 130mm Max. height of supply bobbin Max. 460mm Twist direction S or Z Spindle tensioner Ball type Spindle device motor power 15KW Take-up Take-up traverse 200mm Take-up bobbin size 230mm×56mm Take-up speed Max. 75m/min Filar guide traverse control Gear case Take-up angle 0 30° Take-up package Max. 3KG Retract sides device Single spindle Take-up motor power 3KW heater Rated power 00w/spindle Fact power consumption 10%total power Temerature adjusted range 0 300°C Heater height 460mm False-twistspindle Spindle speed 80000r/min 160000r/min Type Magnetic type