ЧП Дробилка

jaw crusher: Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely applicable to mining, metallurgical industry, building material, highway, railway, and chemical industry.Working Principle: The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.Characteristics: High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost. Technical data Model× Feeding mouth size(mm) Max feed size (mm) Outlet adjusting range (mm) Capacity (t/h) Motor power (kw) Weight (t) Outline dimension (mm) PE150×250 150×250 125 10-40 1-3 5.5 1.5 896×745×935 PE250×400 250×400 210 20-50 5-20 15 2.5 1430×1310×1340 PE400×600 400×600 350 40-100 15-60 30 6.8 1700×1732×1653 PE500×750 500×750 425 50-100 30-85 55 12.5 2035×1921×2000 PE600×900 600×900 480 65-160 45-110 55-75 18.5 2290×2206×2370 PE750×1060 750×1060 630 80-140 105-195 90-110 29.5 2655×2302×3110 PE900×1200 900×1200 750 95-165 90-220 110-132 56 3800×3166×3045 PEX150×750 150×750 120 18-48 5-16 15 3.8 1200×1500×1200 PEX250×750 250×750 210 25-60 15-30 22-30 5 1667×1545×1020 PEX250×1000 250×1000 210 25-60 15-50 30-37 7 1550×1964×1380 PEX250×1200 250×1200 210 25-60 20-60 37-45 9.8 2192×1900×1950 Notes: The technical data are only for reference. Any change shall not be informed additionally. Please confirm it by call or email. LEE