ЧП алюминиевые композитные панели PVDF или АКТ

We are thebuilding material supplier of many Chinese famousbuildings.such as: Guangzhou Olymic Center,Guangzhou International Exhibition Center,Guangzhou Asian Games,Guangzhou New Baiyun International Aerodrome,BeijingBureau of Technology Supervision,Tongzhou Olympic Gardenand so on Sontasun Aluminum Composite Panel Specification:1. Standard:GB/T17748-1999Standard2. Material: (a): Front: Aluminum-alloy sheet coated with fluoro-carbon resin (PVDF) and Polyester resin (PE)roasting painting (b): Core: nontoxic polyethylene (c): Back: Aluminum-alloy sheet coated with polyester resin painting (d): Surface finish: Treated with PVDF and PE resin rolling roasting coating (e): Aluminum alloy sheet thickness: 0.06mm0.5mm3. Dimensions: (a): Thickness: 2mm/3mm/4mm (b): Width: 1000mm/1220mm/1240mm/1300mm/1570mm etc (c): Standard Size: 1220*2440mm (d): Non standard sizes and special colors are available according to the customers request.Features: (1)Weather resistance (2)Fire proof (available) (3)Even coating (4)Easy maintenance (5)Excellent torsion strengthApplication scope: (1)Building exterior curtain walls (2)Decoration and renovation additions for old building (3)Decoration of interior walls/ceilings/bathrooms/kitchens and balconies (4)Shop door decorations (5)Advertisement board display platforms and signboards (6)Wall boards and ceilings for tunnels (7)Industrial materials, materials for vehicles and boats Structure: aluminum-plastic composite panel, in short we call aluminum composite panel, ACP is made form thermoplastic core layer sandwiched between two special pretreated thin aluminum outer layer sheets. One surface of the front aluminum sheet is pre-coated with qualified Polyester or Kynar500 PVDF (polyvinylidene fluoride, min70%) in several attractive colors. Characteristics: pliable and tough, good machinability, easy to be cut, tailored, bent, arched and installed.Application: 3mm inner-wall aluminum composite panel is widely used to decorate isolating wall, ceiling , decorative panel, shirt wall, showing table, furniture, all kinds of control cabinets and panels, body of cars and so on. 4mm outer-wall aluminum composite panel is widely used on big construction curtain wall, balcony, store front, signal board, awning, body of cars, industrial material and so on.Specification:1. Standard:GB/T17748-1999Standard2. Material: (a): Front: Aluminum-alloy sheet coated with fluoro-carbon resin (PVDF) and Polyester resin (PE)roasting painting (b): Core: nontoxic polyethylene (c): Back: Aluminum-alloy sheet coated with polyester resin painting (d): Surface finish: Treated with PVDF and PE resin rolling roasting coating (e): Aluminum alloy sheet thickness: 0.06mm0.5mm3. Dimensions: (a): Thickness: 2mm/3mm/4mm (b): Width: 1000mm/1220mm/1240mm/1300mm/1570mm etc (c): Standard Size: 1220*2440mm (d): Non standard sizes and special colors are available according to the customers request.Features: (1)Weather resistance (2)Fire proof (available) (3)Even coating (4)Easy maintenance (5)Excellent torsion strengthApplication scope: (1)Building exterior curtain walls (2)Decoration and renovation additions for old building (3)Decoration of interior walls/ceilings/bathrooms/kitchens and balconies (4)Shop door decorations (5)Advertisement board display platforms and signboards (6)Wall boards and ceilings for tunnels (7)Industrial materials, materials for vehicles and boats