Место происхождения |
Guangdong China (Mainland) |
Бренд |
APSTEC |
Номер Модели |
APS-130 |
Your 130 watts power inverter converts 12-volt vehicle battery power into 120 volts of AC power. You can use the inverter in your vehicle to operate many types of appliances that use AC power such as TVs, VCRs, portable computers, and lights for emergency use or camping use. The inverter works with your vehicle’s engine turned on or off (accessory mode). It provides a continuous output of up to 130 watts. BASIC OPERATION l Use the right operating voltage for both input and output of the inverter. l Insert the cigarette light plug into the cigarette lighter socket of the car. l Insert the plug of your appliances into AC socket at the front of the inverter. l Turn ON the power switch that is located at the front of the inverter, and the green LED light will light as indicator that the unit at work. CAUTION: l DO NOT USE THE INVERTER IN A POSITIVELY GROUNDED VEHICLE. RECOMMENDATION l If the power inverter makes beeping sound, turn OFF the power inverter and disconnect all appliances from inverter and disconnect the inverter from the power supply. The beeping sound is simply the low battery warning, which indicates that the voltage of the battery power supply is getting low. Please restart the vehicle engine before operating the power inverter. l When you are not using the inverter, turn the switch to OFF and disconnect the inverter from the power supply. l Disconnect the inverter when starting the vehicle’s engine. BATTERY USE TO avoid over-discharging your vehicle’s battery, you should run your engine for 10-20 minutes to recharge the vehicle’s battery after 2-3 hours of operating the inverter. If you choose to connect the vehicle directly to your battery terminals, it is important to connect with right polarity (Connect + from inverter to + of battery terminal and connect – from inverter to – of battery terminal) CAUTION: THE FOLLOWINGS OPERATION WILL DAMAGE THE UNIT: l REVERSE POLARITY BY CONNECTING THE WIRES TO THE INCORRECT TERMINALS. l CONNECTING THE BATTERY CHARGER TO REPLENISH BATTERY WITHOUT DISCONNECTING THE INVERTER FIRST. l OPERATING THE INVERTER AND BATTERY IN OR AROUNT WATER. MEASURING THE AC VOLTAGE The output waveform of the AC output is a MODIFIED SINE WAVE. To measure the AC output voltage, you must have a TRUE RMS VOLTMETER. SAFETY PRECAUTION Do not open the case of the inverter. The high voltage inside the unit is the same type of power as our electrical outlets at home. Do not let the cord of the inverter or any appliance’s cord get wet. Do not operate the inverter in or around water. The voltage of the unit makes electrical shock hazard if operated in wet conditions. Do not connect the AC inverter directly to another AC power source. Keep it away from children, the inverter produces power just like your AC wall outlets at home and should be treated seriously. Allow at least 1 inch of clearance around the inverter for airflow. If you operate the inverter in a moving vehicle, you need to secure the inverter to prevent it from shifting around while the vehicle is moving. If there is anything wrong with the inverter, disconnect all of the power. TROUBLE SHOOTING TROUBLE SHOOTING