BZE-S F самоуправления плавающего типа электронного один ш

Application Scope 1. Measuring the attitude parameters of petroleum deflected well engineering; 2. Measuring the bending of geological drilling; 3. Replacing singular shot imaging inclinometer; Features: 1. In-built solid sensor component, with features of compact structure, light weight and high anti-vibration; 2. Special data processing instrument, capable of eliminating manual reading error; 3. Multi-group data tested for each measured point, with function of self-calibration; 4. Available timing operation: 1 99 minutes; 5. Special rechargeable battery cartridge used; 6. Output results can be save permanently with low cost of consumables; 7. Capable of monitoring voltage of battery Measurement scopeInclined angleAzimuthOrientation of magnetic operating faceOrientation of high side operating face0°--36°0°--360°0°--360°0°--360°Precision ±0.2°±1.0°±1.0°±1.0°Maximum operating temperature: 90deg OD of carrier: Φ48mm Impact resistance: 2000g,0.5ms OD of probe tube: Φ30mm Shock resistance: 10g, 20100Hz Downward speed of instrument: no more than 5.5m/s Uninterrupted operating period ≥12h Range of delay: 1--99min Outlet pressure of mud pump: ≤22Mpa Communication interface: RS-232 Max. pressure withstood of carrier: hρ+P 70Mpa≤2500m Max. pressure withstood of carrier: hρ+P 100 Mpa(2500-4000m) Max. pressure withstood of carrier: hρ+P 40 Mpa(about 1000m) Well measuring depth: depending on the specific gravity of mud, i.e hρ+P≤6070Mpa Well measuring depth: depending on the specific gravity of mud, i.e hρ+P≤Max. pressure withstood of carrier Remark: hWell measuring depth, unit: m; ρspecific gravity of mud, unit: g/cm³; Poutlet pressure of mud pump, unit: Mpa BZE-S F self-floating type electronic single shot inclinometer