BZE-MR вообще электронный неск инклинометр

Technical ParameterInclination0°--180° ±0.2°Azimuth0°--360° ±1.0°(For inclination≥10°)Tool face 0°--360° ±1.0°Max Temp 90ODΦ30--Φ45mmImpact resistance2000g, 0.5msShock resistance10g,20100HzUninterrupted operating period≥12hRange of delay1--1000 minMin time interval1 min.Time interval15--1000sBZE-MR General electronic multishot inclinometer Electronic multi shots inclinometer mainly is used in the scope of measuring the attitude parameters of petroleum well engineering and measuring the bending of geological drilling. When working down a well, according to the preset working mode the primary measurement data are stored in the memories installed in probe. When the instrument returns to the surface, computers and other surface instruments will retrieve the data stored in memories and calculate inclination, azimuth, tool face, temperature and so on as required by drilling. Data processing, plotting and printing can be completed further. By using the same probe tube, the inclination, azimuth and tool face of a certain point can be measured, as well as the inclination and azimuth of multi points of a certain well section. BZE-ME small diameter electronic single shot inclinometer is suitable for the application of deeper well or smaller well bore.