Buyerpan силикат кальция доска (тепловой insulatio

Low density products for multi-purpose building use. The purpose of Buyerpan is for indoor partition and ceiling in building for thermal insulation requirement in dry area.Component Buyerpan is manufactured from Portland cements; Lime; Quartz; Cellulose fiber; additives and water. It does not contain asbestos,brucite ,meerschaum, glass fiber and formaldehyde. Specification 4-20* 1220 *2440/3050mm REMARK: We can also supply other specification as the clients specially requirementPhysical properties The following data are the average tested figures during manufacturingDensity ≤1.10 g/cm3 Thermal Conductivity ≤0.25 W/(mk) Water Contain ≤10% Moisture Movement ≤0.25 Non-combustibility GB 8624 Class A /BS476 PART4,6and7 Bending Strength Oven dry Cross ≥9.0 Mpa Parallel ≥7.0 Mpa REMARK: Please contact our technical department if you need more technical index. Standard: The panels meet the national standard as JC/T 564-2000. But we carry out the standard of ISO-9001 from SGS and our interior control index which is superior compared to JC/T 564-2000 in our factory. The panels also meet the highest grade of standard as ISO-1182, GB 8624-1997 and BS 476 from UK. Meanwhile, New Element Co. Ltd obtains the China Environmental Labeling Product Certificate. Our product satisfy the national environmental prescript from its raw material to the end of the product which including the manufacturing, processing and usage.