Бумага Изготовление продукции машина-JR1300 окружающей среды

Paper MakingMachine-JR1300 Environmental Saturation Paper Dyeing Machine 1.Equipment: Equipped with lift device. It’s easy for loading and changing rollers. 2. Main technical data ModelJR1300Speed 30-80m/min Effect Breadth 1100m/min Paper Range 40-230g/m2 Coloring Agent Direct dye/Alkali dye Rolling DIA Max1500mm Max Heating Power 225kw Power Consumption Range 100-200kw/hour Total Power 252kw Net Weight 31000kg Overall Dimension 1600x2900x3400mm Power Supply 380V 50HZ three phase four-wire system 3. Dyeing machine design data Type of dye roll to roll environmental saturation typeMax operating speed 80m/minMax diameter of unwind and rewind reel 1500mmMax width of unwind and rewind reel 1100mmCore inside diameter of unwind and rewind roll 3” or 6”Max width of dyeing paper 1100mmDiameter of dry roll 4800mmNet trim after winder no trim Technical Force The environmental saturation dyeing machine is a new creation researched and produced independently by our company as the domestic origination. Raw material It uses the aqueous solution mixed with pollution-free organic chemical raw materials in a special formula and dye the paper in saturating, which will not result in waste of raw materials and dye. The colors of coloring agent are controllable according to the requirements. Saturation special point The saturation dyeing machine is different from the traditional coating one. It saturates the dye from the surface of paper into the paper core to form a special paper (also called cored color paper), whose core and its surface share the same color, While the coating-dyeing machine only coats the color on the surface of paper, but the color of core does not change and is still the same as the primary one. Consequently, the saturation dyeing paper is more widely used than the coating one. Powercontrol The machine is of mechanic-electronic-pneumatic-hydraulic integration design with a linkage controller and frequency governor, which makes it easy in operation and adjustment. Drying way The dry part is an electrical heating oven roll combined with a heat wind dryer, which can speed up drying and heating to improve the efficiency in drying. The machine can integrate with the embossing and polishing machines. New & Environmental! Welcome to visit our website: http://cn-shuangxiang.en.alibaba.com/