Боковой ввод рукавный фильтр 1C, 2C, Р17

The fluid passing through the inlet on the side of filter is forced by pressure down to the filter bag which is hold up by the support basket. And then impurities are collected in the filter bag, the fluid filtered is discharged out from the outlet at the bottom of the filter. The filtration precision depends on the pore size of the filter bags gap. The fluid flows from the top of the filter, and reaches the surface of the filter bag uniformly distributed, resulting in smooth and good filtration. Side-entering bag filter has many advantages including rational design, good sealing property, smooth transition, and easy operation. Especially the probability of side-leakage is minimized, filtration precision is guaranteed, filter bag is easy for change, all these result in minimized operation cost. Both the inside and outside of the main housing are sandblasted and polished, easy for cleaning. The heating-jacket is optional, the tripods and the load hooks are adjustable according to customer requirement. Advantages Using advanced precision casting mould, fewer welds, high and stable compression strength, and easy operation.Leak-proof structure and the unique filter element, ensures the housing qualified and filtration with no leakage. Easy and convenient operation and installation, small occupying area, being widely used, can be used for coarse filter, inter filter and fine filter. Compact structure and polished filter element make sure the inside of filter and the jointing connections with no deposition. The lock eyebolts are made of stainless steel, instead of galvanized steel, to avoid rusting in use. For same filtering effect, compared to the other kinds of filter systems, side-entering bag filter costs less and provides long-term operation.