беспроводной руль выпрямитель

wireless wheel aligner 1、The sophisticated CCD technique with extremely high resolution and accuracy. 2、Eight beam all wireless 360 closed measurement system. quickly finish all measured parameters one-off. 3、The globally lezding biuetooth transmission technology, interference that is deerived from any barrier can be avoided between main machine and sensor,which achieves the quicker and more accurate measurement. 4、Compatibleness of four-wheel measurement, which can be selected freely 5、While front alignment, there’s no need to clamp the rear wheel, which save a half labor and time. 6、Power save mode: Sensors auto power off when out of use in three minutes. 7、The sensor owns LED with six screens.half labor and time. 8、The sensor indicates adjusting range. Convenient and direct-viewing. 9、The sensor has the electronic gradienter installed in it, avoivding the mechanical horizontal error caused in the adjustment of sensor with the purpose of ensuring extremely high accuracy of measurement. 10、Large database contains data about more than 20 thousand types of automobiles, the data about new automobiles can be added periodically or aperiodically depending on new automobile login function. 11、When remote the computer. Sensor data can automatic reset without calibration. 12、Camber angle fixing, preventing automobile’s suspending and data’s pulsating. 13、The SDT data synchronization technology brings about the complete dynamic data synchronization between operation and monitor. 14、New four-point clamp with the characteristics of quickness and high accuracy, eccentricity compensation can be cancelled. 15、Sensors can interchange separately. Sevice is more convintent 16、When measuring retroveersion by rotating steering wheel, the svstem can complete the operation automatically avoiding 17、Customer classification and statistic analyze will help you realize profitabie management. 18、Support remote data updating. 19、Have voice prompt function. ------- Measure Range and Accuracy Parameter Accuracy Range Total Toe ±0.02° ±10° Camber ±0.03° ±10 Caster ±0.1° ±20° SAI ±0.1° ±20° Trust Angle ±0.03° ±10° Working condition Working tempreature -20°C～40°C Relative humidity under 90°C