Бентонит сушильное оборудование

drying equipmentI. Work Drum dryer drum is slightly inclined and able to turn the cylinder body into the wet material from the upper end of the dry material collected from the other side of the lower part. Hot air from the feed side or discharge side access, from the other side of the upper discharge. Cylinder equipped with a copy along to the board, so that the material in the process of continually took a rotating cylinder has shed its full engagement with the hot air to improve the drying efficiency and enable material to move forward. Dried material is generally hot air heat, high temperature flue gas, steam and other. According to the nature of materials, quality requirements and other specific options. Second, performance characteristics Rotary dryer evaporation capacity is generally 30-80kg/m3 · h; with the air temperature increase and improve, and with the nature of the material change of water. Urgent than the flash drying, spray drying the evaporation intensity is high. Thermal efficiency of 40% -70% generally. Equipment, stable, reliable, no wearing parts, less trouble, long life industry has been widely used in the dryer. Third, the scope 1, from the raw material form, the centrifuge cake, filter press cake; free flow of powder, granules, flakes, fibers and other materials dry. 2, from a range of application materials are widely used in mineral products, building materials, chemical products, fertilizer, organic powder, fodder, wine tank, starch residue, corn residue, residue and other dry. 3, from the rotary drum dryer body, it can be divided into direct, indirect heating, ventilation tube heating, indirect heating steam pipes, heating and other duplex structure. 4, from the drying temperature, it can be from 60 °C -600 °C range of choice, in principle, the higher the temperature, the higher the evaporation intensity. Therefore, small equipment, investment, low energy consumption.