Белый Оксид алюминия для абразивных материалов

White Aluminium oxideis made from high quality alumina by melting above 2000°C in the electric arc furnace and then cooling. It is with high purity, great self-sharpening, acid and alkali resistance, high temperature and stable thermal performance. Its hardness is a little higher than brown fused alumina. It is with low toughness, great grinding ability, small heat and high efficiency. It can be made to the abrasives, suitable for sandblasting and grinding high carbon steel and staining steel and other fine-grained abrasive; also be used for precision casting and high-refractory materials. Physical propertiesChemical compositionsValue of specifications (%)HexagonalAl2O3≥99.54Main crystal bodyAl2O3ColorwhiteNa2O≤0.23Grain density ≥3.9 g/cm3Bulk density 1.75-1.95 g/cm3SiO2≤0.03Morse hardness≥9Linear expansion coefficient(1/°C)8.3x10-4 Fe2O3≤0.04Loss on ignition (%) ≤0.10 White Aluminium oxideabrasive sandblasting Performance and advantages 1. Not affecting the color of the processing cases; 2. Sandblasting in the non-iron process; 3, Powder level is ideal for wet blasting and the study of light work; 4, High speed processing and quality; 5, Containing a very low amount of iron oxide, suitable for non-ferrous blastingoperations; 6, After acid washing steps Usage: 1. Available research in a variety of blasting and light(lapping)operations; 2. Bolero or spay acrylic art of beauty processing; 3. The process of blasting the TV screen; 4. The cutting of silicon water; 5. The tooth model of clean sand; 6. Precision sand casting; 7.other ceramic additives.