BCN-350SMT серии для бессвинцовой пайки машина

The dual wave solder pot is made of anti-erosion titanium alloy, the vibrational wave and the horizontal wave adopt the worlds top technology. The wave soldering machine is available with a beautiful appearance of a arc glass gate and is easy to clean. High quality anti-erosion titanium clasp claw conveyor chain of high elasticity and low distortion is available with the electronic frequency conversion speed adjustment and the conveyor speed adjustment and the conveyor speed V=01800mm/min. The to-and-fro flux spraying is driven by no-bar cylinder. Pre-heater: 1.6m (length) fine even hot wind pre-heating system can protect the PCB from sudden heat concussion and imptove the heating efficiency-power saving. (hot wind pre-heater t±2; IR lamps of heating pipe pre-heater t±2) The long type hoe wind. Pre-heater can ensure the lead-free flux of most treasonable activation temperature and activation time. (Activation temperature: normal flux 90-105; lead-free 120-140). Cooling system: adopts room temperature cooling, the PCB top and below is cooling rapidly in the same time, the wind gate temperature. May reach -210. Model No. BCN-350SMT BDN-350SMT BEN-350SMT Control Method Standard Panel Control Feel Screen Control Windows 2000 Control PCB Size(mm) Max 330 mm Conveyor Speed 100∼2000 mm/min Pre-heating Zone Length:1590 mm(530mm×3) Room Temperature∼180 Heat Compensation Length: 210 mm Power: 1000 W×3Pcs Solder Temperature Room Temperature∼350 PCB Soldering Angle 4-7° Air Pressure of Spray 5∼6 Kgf/cm2 1.8L Spraying Nozzle Move No-bar Cylinder Solder pot Capacity Approx400 Kg Solder pot Heater 220V 1000W×9Pcs Wave Motor 3φ380V 0.18KW×2Pcs Forcible cooling system 1.5 HP Solder Type Lead-free Solder/Normal Solder Power Supply 3phase 8 Wires 380V 50/60Hz Total Power Consumption Approx25 KW Outside Dimension 4000(L)×1250(W)×1600(H) Weight 1250 Kg