автоматический сублимации плоским передачи машины (ГКМ-17

Automatic heat transfer machineParameterVoltage 380V Power 9kw Temperature range 0-399°C Time range 0-999S Stoke of air cylinder 125cm Work pressure 8kg Weight 450/650KG Size of package 100×135×155cm Transfer area 80*100cm 100*120cm Features This machine can be used for digital sublimation transfer printing, good-sized billboard and piece of garment transfer printing. Automatic air operated pressing, fully digital temperature control, temperature readout accuracy +-2 degree.Adopted hydraulic equipment, then with strong and even pressure. It has high efficiency for two working plates. Oil and temperature style heat equipment adopted, making heat quickly and even. Ticker and larger aluminum heating board make sure heating more even, suitable for large size printing Before using1. You need to adjust the machine on flat position using “bottom adjuster” 2. Connect the air compressor, turn on power, then adjust “Pressure adjust valve”(usually 3-6kg/cm2) until the heating board rising up automatically. Attention1. We have 380V and 220V voltage, when you order, please confirm your voltage first2.You need to check “Waterspout” whether have water when you using the machine for a while, if it have water, then please drain the water, then tighten the water drain switch3. Please do not touch the heating board, or it will injure your fingers.4. You need to test t-shirt first to get right temp, pressure, time, and best printing effect also connect with depth of t-shirt and types of transfer paper5. The function of the clocks is complex, so please do not adjust other function, you only need to set temp and time, or it will affect your using!!!